40
The use of inferior-quality dust bags (e.g. paper
bags) can have a negative effect on the service life
and performance of your appliance.
Using unsuitable or inferior-quality dust bags can
also damage your vacuum cleaner.
Such damage is not covered by our guarantee."
You can find more information about this at
www.siemens-home.com/dust-bag. You can order
our original vacuum cleaner bags here.
B Hepa filter
VZ154HF
Additional, washable filter for cleaner exhaust air.
Recommended for allergy sufferers.
C TURBO-UNIVERSAL® brush for upholstery
VZ46001
All-in-one brushing and vacuuming of upholstered
furniture, mattresses, car seats, etc. Especially sui-
table for picking up pet hair. The brush roller is dri-
ven by the suction air flow of the vacuum cleaner.
No separate electrical connection is needed.
D TURBO-UNIVERSAL® brush for floors
VZ102TBB
All-in-one brushing and vacuuming of short-pile rugs
and carpets, and for all floor coverings. Especially
suitable for picking up pet hair. The brush roller is
driven by the air flow through the vacuum cleaner.
No separate electrical connection is needed.
E Hard-floor tool
VZ123HD
For vacuuming hard floors
(parquet, tiles, terracotta, etc.)
Before using for the first time
Figure
4
Open the accessories compartment.
4
Insert the crevice nozzle and upholstery nozzle in the
accessories compartment in the appliance lid.
4
Close the accessories compartment.
Initial use
Figure
a)
Insert the flexible hose adapter into the air intake
opening and allow it to lock into place. When doing
so, make sure that the connecting part of the flexible
hose adapter is plugged into the appliance socket.
b)
To remove the flexible hose, press the release button
and pull the hose out.
Figure
4
Push the handle into the telescopic tube until it
locks into place. When doing so, make sure that the
connecting part of the telescopic tube is inserted
into the correct recess in the handle.
4
To release the connection, press the locking collar
and pull out the telescopic tube
1
2
3*
Figure
4
Push the telescopic tube into the connecting piece
on the floor tool until it locks in place.
4
To release the connection, press the locking collar
and pull out the telescopic tube.
Figure
ELECTROMATIC® brush
4
Slide the telescopic tube into the connecting piece
for the ELECTROMATIC® brush until it clicks into
place. Make sure that the connecting part of the
telescopic tube is inserted into the correct recess in
the connecting piece of the ELECTROMATIC® brush.
Electrical contact with the vacuum cleaner is made
once the connecting part is engaged.
4
To release the connection, press the locking collar
and pull out the telescopic tube.
Figure
4
Move the sliding switch in the direction of the arrow
to release the telescopic tube and adjust it to the
length required.
Figure
4
Holding the power cord by the plug, pull out to the
required length and insert the plug into the mains
socket.
!
After continuous use of more than 30 minutes,
completely disconnect the power cord from the
power supply.
=> Risk of overheating and subsequent damage.
Figure
Switching on and off
4
To switch the vacuum cleaner on or off, press the
ON/OFF button.
Figure
Controlling the suction level
The required suction level can be set to the level
required by turning the control knob in the direction
of the arrow.
Low power range
=>
For vacuuming delicate materials,
such as upholstery, curtains, etc.
Medium power range
=>
For the daily vacuuming of light dirt deposits.
High power range
=>
For vacuuming durable floor coverings,
hard floors and heavily soiled surfaces.
6*
7
8
9
5
4*
*depending on model
Summary of Contents for VS Z5
