background image

en 

Installation and connection

12

1.

Remove any packaging and pro-
tective covers completely from the
appliance.
→ 

"Disposing of packaging",

Page 11

.

2.

Check the appliance for visible
damage.

3.

Open the appliance door. 
→ 

"Basic operation", Page 30

4.

Remove any accessories from the
drum.

5.

Close the appliance door.

4.2 Contents of package

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.

ATTENTION!

If the appliance is operated with in-
complete or defective accessories,
the appliance may not be able to op-
erate properly, or this may result in
material damage or damage to the
appliance.

Do not operate the appliance with
incomplete or defective accessor-
ies.

Replace the accessories in ques-
tion before operating the appli-
ance. 
→ 

"Accessories", Page 29

Note: 

The appliance has been tested

at the factory to check it is in working
order. As a result, water stains may
remain in the appliance. These marks
will disappear after the first wash
cycle.
The delivery consists of the following:

¡

Washing machine

¡

Accompanying documents

¡

Transit bolts 
→ 

"Removing the transit bolts",

Page 13

¡

Cover caps

¡

Water inlet hose 
→ 

"Connecting the water inlet

hose", Page 14

4.3 Requirements for the in-

stallation location

WARNING

Risk of electric shock!

The appliance contains live parts.
Touching live parts is dangerous.

Do not operate the appliance
without a cover cap.

WARNING

Risk of injury!

When using the appliance on a base,
the appliance may tip over.

Always secure the feet of the appli-
ance to a base using the manufac-
turer's fixing brackets → 

Page 29

before using the appliance for the
first time.

ATTENTION!

If residual water in the appliance
freezes, this may cause damage to
the appliance.

Do not install or operate this appli-
ance anywhere that is liable to ex-
perience frost or outdoors.

If the appliance is tilted at an angle
greater than 40°, residual water may
leak out of the appliance and cause
material damage.

Tilt the appliance carefully.

Transport the appliance in an up-
right position.

Installation loca-
tion

Requirements

Base

Secure the appli-
ance with fixing
brackets
→ 

Page 29

.

Summary of Contents for WG44A1XVZA

















































Reviews: