background image

en 

Troubleshooting

44

Fault

Cause and troubleshooting

Detergent or fabric
softener drips off the
seal and collects on
the door or in the seal
fold.

Too much detergent/fabric softener in the detergent
drawer.

When dosing liquid detergent and fabric softener,
observe the marking in the detergent drawer and
do not dose above this.

The spin result is not
satisfactory. The laun-
dry is too wet/too
damp.

A low spin speed is selected.

The next time you run a wash cycle, set a higher
spin speed.

Start the 

Spin

  programme.

⁠  is activated.

Select the programmes that are suitable for the
type of fabric.

Drain pipe or water outlet hose is blocked.

Clean the drain pipe and the water outlet hose.

Drain pipe or water drain hose is caught or jammed.

Ensure that the drain pipe and water drain hose are
not kinked or trapped.

The unbalanced load detection system has interrupted
the spin cycle because the laundry is unevenly distrib-
uted.

Redistribute the laundry in the drum.

Note: 

Where possible, mix large and small items in

the drum. Different sized items of laundry distribute
themselves better during the spin cycle.

Start the 

Spin

  programme.

Unbalance load detection system is using a reduced
spin speed to eliminate an unbalance.

Redistribute the laundry in the drum.

Note: 

Where possible, mix large and small items in

the drum. Different sized items of laundry distribute
themselves better during the spin cycle.

Start the 

Spin

  programme.

Detergent residue on
the damp washing.

Detergents may contain water-insoluble substances
that deposit on the laundry.

Start the 

Rinse

  programme.

Detergent residue on
the dry laundry.

Detergents may contain water-insoluble substances
that deposit on the laundry.

Brush out the laundry after washing and drying.

Summary of Contents for WG44G20BDN





















































Reviews: