en
Basic settings
34
1.
Pull out the detergent drawer.
2.
Open the dispenser cover.
3.
Pour liquid detergent
and fab-
ric softener into the relevant
dispensers.
→
Do not exceed the marking for the
maximum filling level when filling.
4.
Close the dispenser cover.
Note:
To prevent the liquid deter-
gent or fabric softener from drying
out, close the dispenser cover im-
mediately after filling.
5.
If required, add cleaning aids such
as stain remover, water softener or
bleach into the compartment for
manual dosing.
→
6.
Push in the detergent drawer.
7.
15.3 Basic dosage
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
Adjusting the basic dosage
1.
Press and hold
i-Dos
for ap-
prox. 3 seconds.
a
The display shows the basic
dosage set for
.
2.
To adjust the basic dosage for ,
press
i-Dos
.
3.
To adjust the setting, press
ter-
min.
.
4.
To end the setting process, wait
briefly.
16 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
Note:
You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Note:
You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .