background image

en 

Transportation, storage and disposal

46

17.1 Emergency release

Releasing the door

Requirement:

 The drain pump is

empty. → 

Page 33

1.

ATTENTION!

 Escaping water may

cause material damage.

Do not open the door if you can
see water through the glass.
Pull the emergency release down-
wards with a tool and release.

a

The door lock is released.

2.

Insert the maintenance flap and
lock it into place.

3.

Close the maintenance flap.

18 Transportation, stor-

age and disposal

You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.

18.1 Removing the appliance

Note: 

You can find further information

in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .

1.

Turn off the tap.

2.

Empty the water inlet hose.

3.

Switch off the appliance.

4.

Unplug the appliance's mains plug.

5.

Drain the water. 
→ 

"Cleaning the drain pump",

Page 33

6.

Detach the hoses.

18.2 Inserting the transit

bolts

Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.

1.

Use a screwdriver to remove the 4
cover caps.

Keep the cover caps.

2.

Install the 4 transit bolts. Refer to
the description 
→ 

"Removing the transit bolts",

Page 13

 for this and proceed in re-

verse order.

18.3 Using the appliance

again

For further information, see 
→ 

"Installation and connection",

Page 12

 and 

→ 

"Before using for the first time",

Page 19

.

Summary of Contents for WG44G2MEDN





















































Reviews: