en
Cleaning and servicing
34
16.3 Cleaning the drain pump
Clean the drain pump in the event of
faults, e.g. blockages or rattling
noises.
Emptying the drain pump
1.
Turn off the water tap.
2.
Switch off the appliance.
3.
Disconnect the appliance's mains
plug from the power supply.
4.
Open and remove the service flap.
1
2
5.
Slide a sufficiently large container
under the opening.
6.
Take the drain hose out of the
holder.
7.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
▶
Do not touch the hot detergent
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
8.
Firmly press on the sealing cap.
Summary of Contents for WG54G201GB
Page 51: ......