NL Set up and connect
3.
Loosen and remove the screws of
the horizontal transport
reinforcement with a T20
screwdriver.
1.
Connect the water inlet hose to the
tap (26.4 mm = 3/4").
2.
Open the tap carefully and check
whether the connections are
tight.
4.
Remove the transport
reinforcement.
Connection types for water drainage
The information will help you to connect
this appliance to the water outlet.
PAY ATTENTION!
When draining, the water drain hose is
under pressure and can come loose
from the installed connection position.
▶
Secure the water drain hose against
unintentional loosening.
Remark: Observe the pumping
heights.
The maximum pumping height bed
4.6 Connecting device
Connect water supply hose
The connection position
tie with a
hose clamp
(24-40 mm) bore
gene.
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
▶
Do not immerse the electric
Aquastop valve in water.
washbasin
the water
feeding hose with
a bend
fixate and
gene.
16
Summary of Contents for WG56G2M7NL
Page 18: ...NL Set up and connect 2 Check the mains plug for tightness 18 ...
Page 53: ......
Page 54: ......
Page 55: ......