Set up and connect NL
plastic stand
pipe with rubber
run muff or a
floor drain
the water
feeding hose with
a bend
fixate and
gene.
2.
To adjust the appliance, turn the
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
4.7 Adjusting the device
To reduce noises and vibrations and to
prevent the device from walking, place
the device horizontally.
1.
Loosen the lock nuts with a SW17
open-end wrench.
All appliance feet must be firmly
planted on the floor.
3.
Tighten the lock nuts against the
housing with an open-end wrench
SW17 hand-tight.
Hold the appliance foot while
doing so and do not adjust the
height.
4.8 Connecting the appliance
electrically
1.
Insert the mains plug of the
mains cable of the device into a
socket in the vicinity of the
device.
The connection data of the device
can be found in the technical data
17
Summary of Contents for WG56G2M7NL
Page 18: ...NL Set up and connect 2 Check the mains plug for tightness 18 ...
Page 53: ......
Page 54: ......
Page 55: ......