NL Transport, storage and disposal
17.1 Emergency release
1.
Close the tap.
2.
Empty the water inlet hose.
3.
Turn off the device.
unlock door
Required: The drain pump is empty.
4.
Unplug the appliance from the
mains.
1. ATTENTION! Running water can
lead to material damage.
▶
Do not open the door if water can
be seen behind the glass.
5.
Let the suds drain.
pump", page 36
6.
Disassemble the hoses.
Pull the emergency release
downwards with the aid of a tool
and release it.
18.2 Installing transport locks
Secure the device before transport
with the transport locks to avoid
damage.
1.
Remove the 4 cover caps using a
screwdriver.
a The door lock is unlocked.
2.
Place the service door and click it into
place.
3.
Close the service door.
Keep the cover caps.
18 Transport, on-
hit and drain
2.
Install the 4 transport locks. When
doing so, observe the description
Removing transport locks and
proceed in reverse order.
Here you will find an explanation of
how to prepare the device for
transport and storage. We also
explain how to dispose of old
appliances.
18.3 Restarting the device
18.1 Disassembling the device
▶
For more information, see
time", Page 21
.
Remark: Detailed instructions for use
can be found at www.siemens-
home.bsh-group.com or by scanning
the QR code on the title page of these
operating instructions.
48
Summary of Contents for WG56G2M7NL
Page 18: ...NL Set up and connect 2 Check the mains plug for tightness 18 ...
Page 53: ......
Page 54: ......
Page 55: ......