17
Washing and drying
Washing only
Set the programme selector to the desired programme,
e.g.
resistentes/algod. (Cottons)
–
0
(Remaining time) and the recommended load
in
kg
are shown
alternately on the display panel. The
!
symbol flashes.
If necessary, adjust the spin speed and select any washing options for
your individualised programme
– The
secar
ˆ
(dry)
function must not be activated.
Load the laundry
– Observe the maximum load,
Press the
inicio
/pausa (
Start/
Pause) button.
–
0
(Remaining time) is shown in the display.
The
!
(Programme start) symbol lights up.
– The washing programme starts.
Drying only
Set the programme selector to the desired drying programme.
– The display panel alternately shows
0
(remaining time) and the
recommended load in
kg
.
Press the
secar
ˆ
(Dry)
button to set the
drying time
Load the laundry
– Observe the maximum load,
Press the
inicio
/pausa (
Start/
Pause) button.
–
0
(Remaining time) is shown on the display panel and the
ˆ
and
!
symbols light up.
– The drying programme starts.
Washing and drying
Successive washing and drying.
Set the programme selector to the desired programme,
e.g.
resistentes/algod.
60°C.
–
0
(Remaining time) and the recommended load in
kg
are shown
alternately on the display panel. The
!
symbol flashes.
If necessary, adjust the spin speed and select any washing options for
your individualised programme
Press the
secar
ˆ
(Dry)
button to set the drying time
Load the laundry
– Observe the maximum load in
kg
,
Press the
inicio
/pausa (
Start/
Pause) button.
The drying programme that is carried out is automatically determined by
the washing programme, see the Programme table