19
End of the programme
The washing and drying programmes are ended automatically.
appears on the display panel.
Set the programme selector to
Off
.
Remove the washing from the drum.
Leave the door open so that the inside of the washer-dryer can dry out.
Turn off the tap (not necessary on models with Aqua-Stop).
If the spin function was deactivated at the start of the wash cycle,
$
(no final spin = laundry remains in last rinsing water), the washing
programme is automatically stopped after the final rinse. The display
panel shows
alternating with
.
In order to drain the rinsing water and, if required, spin the laundry:
Press the
Spin rpm
button repeatedly until the required spin speed is
set. The water is drained and the washer-dryer spins the laundry. The
programme is completed when
appears in the display field.
The maximum spin speed depends on the selected wash programme.
If you do
not
wish to spin the laundry:
Press the
Spin rpm
button (remaining time for draining is displayed).
The water is drained, but the washer-dryer does not spin the laundry.
The programme is complete when
appears on the display
panel.
Set the programme selector to
Off
.
Remove the laundry.
Leave the door open to allow the inside of the washer-dryer to dry out.
Turn off the tap (not necessary on models with Aqua-Stop).
Childproof lock
For preventing the washer-dryer functions that you have set from being
changed inadvertently.
Activate/deactivate:
Press the
Option
and
Select
buttons at the same
time to activate or deactivate the Childproof lock. When the childproof
lock is activated,
@
lights up on the display.
Rinse Hold
i
Summary of Contents for WK14D541
Page 35: ...35 ...