background image

Positioning and connecting       

en

39

5

Positioning and 

connecting

Positioning and connecting

Included with the appliance

Note:  

Check the machine for transport 

damage. Never use a damaged 

machine. If you have any complaints, 

contact the dealer from whom you 

purchased the appliance or our 

customer services. 

~

 Page 36

In addition

, a hose clamp (24 - 40 mm 

diameter, available from specialist 

dealers) is required to connect the 

water drain hose to a siphon. 

Useful tools

Spirit level for aligning

Spanner with:

– WAF13 for loosening the 

transport braces, and 

– WAF17 for aligning the appliance 

feet

3

+

#

(

Mains cable

0

Bag:

Installation and operating 

instructions

Customer services location 

directory*

Warranty*

Cover caps for openings after 

the transport braces have 

been removed

Adaptor with sealing washer 

from 21 mm = ½" to 

26.4 mm = ¾" *

8

Water supply hose on Aqua-Stop 

models

@

Water drain hose

H

Elbow for securing the water 

drain hose*

P

Water supply hose on standard/

Aqua-Secure models

*

depending on the model

Summary of Contents for WM14W520TH

















































Reviews: