en
Operating the appliance
26
Adding laundry
After starting the programme, you can
add or remove laundry if necessary.
Press the
Ü
button to do this.
The
Ü
button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
If the following appears in the display
panel:
■
Both
the - P - and
Ï
symbols light
up, it is possible to add laundry.
■
- P - lights up, it is not possible to
add laundry.
To continue the programme, press the
Ü
button. The programme continues
automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
■
The load display is not active during
reloading.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Press the
Ü
button.
2.
Select another programme.
3.
Press the
Ü
button. The new
programme starts from the
beginning.
Cancel the programme
For programmes at high temperatures:
1.
Press the
Ü
button.
2.
To cool down laundry: Select
Rinse
.
3.
Press the
Ü
button.
For programmes at low temperatures:
1.
Press the
Ü
button.
2.
Select
Spin
or
Empty
.
3.
Press the
Ü
button.
Programme end during rinse
hold
In the display panel,
$
flashes, and the
preset spin speed and remaining
programme length are displayed for the
selected programme.
Continue the programme by:
■
Pressing the
Ü
button or
■
Changing the spin speed, or setting
the programme selector to
Empty
and then pressing the
Ü
button.
Programme end
- 0 - and
Ï
appear in the display panel.
The
Ü
button indicator lamp is off.