background image

Appliance settings    

en

43

Q

 Appliance settings

Appliance settings

You can change the following settings:

The volume of the buttons and the 

information signals (e.g. at the end 

of the programme)

Select/deselect the appliance's 

automatic switch-off function 

~

 Page 13

Switch the drum-care information 

signal on/off (depending on the 

model). From 

~

 Page 30

 onwards

You will need to activate the setting 

mode in order to change these settings.

Activating the setting mode

1.

Press the 

#

 button.

The appliance is switched on and 

the 

Cottons

 programme is shown at 

position 1.

2.

Press the 

Temperature 

 button and, 

at the same time, turn the 

programme selector clockwise to 

position 2. Release the button.

The setting mode is activated and the 

preset volume for the information 

signals appears in the display panel.

You can now change the settings:

Changing the signal volume

Use the 

Finish in +

 or 

-

 button to 

change the following settings at the 

corresponding programme selector 

positions:

2: The volume of the information 

signals and/or 

3: The volume of the button signals. 

Exit setting mode or:

Selecting/deselecting the 

appliance automatic switch-

off

With the programme selector in position 

4, press the 

Finish in + 

 or 

-

 button to 

turn the automatic switch-off function on 

or off.
Exit setting mode or:

Switching the drum-care 

information signal on/off

depending on the model
With the programme selector in position 

5, press the 

Finish in +

 or 

-

 button to 

switch the 

Drum Clean 

î

 information 

signal on or off.

Exiting setting mode

To exit and save the settings, press the 

#

 button.

The appliance is switched off. The 

selected settings will take effect the next 

time the washing machine is switched 

on.



3RVLWLRQV

0 = off, 

1 = quiet, 

2 = medium, 

3 = loud, 

4 = very loud

Summary of Contents for WM14W750GB

























































Reviews: