NLTroubleshooting
Malfunction
Program does not start.
Cause and Troubleshooting
Remark:Until the fault has been rectified, you can
deactivate the intelligent dosing system and dose
manually.
Detergent drawer is not fully retracted.
▶
Slide in the detergent drawer until the symbol goes out.
Door cannot be
opened.
is activated.
▶
Resume the program byCentrifugeorDrain
to press.
"Resume program at rinse hold", page 35
to choose and pressStart/Refill
at
Temperature is too high.
▶
Wait for the temperature to drop.
▶
Water level is too high.
▶
Select a suitable program for draining.
Power cut.
▶
Open the door with the emergency release.
Washing water is not
pumped out.
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶
Make sure that the drain pipe and the water
drain hose are not kinked or pinched.
Drain pump is clogged.
▶
"Cleaning the drain pump", page 42
is activated.
▶
Resume the program byCentrifugeorDrain
to press.
"Resume program at rinse hold", page 35
to choose and pressStart/Refill
at
Water drain hose is connected too high.
▶
Install the water drain hose at a maximum height of 1
meter.
Pump cover not assembled correctly.
▶
Assemble the pump cover correctly.
Detergent dosage is too high.
50
Summary of Contents for WM16XK75NL
Page 63: ......