background image

en

    Overview of programmes

20

Drum clean

Programme for cleaning and caring for the drum and the outer tub, 

e.g. before running the first wash cycle, if washing frequently at a 

low temperature (40 °C or lower) or if an odour has developed 

after a prolonged period of non-use. The 

Drum clean

 indicator 

lamp flashes when you use have not used a programme of 60 °C 

or higher for a long time.

Notes

Run the drum care programme without any laundry.

Use washing powder or a detergent containing bleach. To 

prevent foaming, only use half the amount of detergent 

recommended by the detergent manufacturer. Do not use 

detergents designed for woollens or delicates.

0 kg
80, 90 °C
1200 rpm

ç

Detergent -, fabric softener -

Rinse / Freshen Up

 * 

Rinse Plus with spin

-
-
0 - 1600** rpm

Ã

l

$

æ

Detergent -, fabric softener 

è

Spin 

 * 

Extra spin with selectable speed

-
-
0 - 1600** rpm

æ

Detergent -, fabric softener -

Drain 

 * 

For the rinsing water, e.g. after the 

$

 setting (Rinse Hold = no 

final spin cycle)

-
-
-
-
Detergent -, fabric softener -

Programme/Type of laundry/Instructions

Settings

* The programmes and additional programme settings are model-dependent. The programmes/settings 

that are available can either be selected directly on the control panel or under 

Others

 Programmes or 

Options 

×

.

** The maximum spin speed depends on the programme and model 

*** Reduced load for the 

speedPerfect 

(

 setting

Summary of Contents for WM16Y892AU

























































Reviews: