Set up and connect NL
The device has an aqua sensor.
3.
Open the appliance door.
a The aquasensor monitors during
the flush adjusts the turbidity of the
flush water and adjusts the duration
and number of flush cycles
accordingly.
4.
Remove the accessories from the
drum.
5.
Close the appliance door.
4.2 Package contents
3.3 Energy Saving Mode
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
If you do not operate the device for a
long time, it automatically switches
to energy-saving mode.
The energy saving mode is exited
when you operate the device again.
If you do not operate the device
further, it will switch off.
PAY ATTENTION!
Use with incomplete or defective
accessories may impair the operation
of the device or cause material
damage and damage to the device.
▶
Do not use the device with
incomplete or defective accessories.
▶
Replace the accessories before
using the device.
Remark: The device does not turn off
automatically when WiFi is activated.
Remark: The device has been checked
at the factory for correct operation.
Water stains may remain in the
device. The stains disappear after the
first wash.
4 Set up and connect
4.1 Unpacking the device
PAY ATTENTION!
Objects that remain in the drum and
that are not intended for use with the
device can lead to material and device
damage.
▶
Before use, remove all these items
and the supplied accessories from
the drum.
The delivery consists of:s
Washing machine
s Accompanying documentss
Transport protections
s cover caps
s Elbow for attaching
the water drain hose
1.
Completely remove packaging
material and protection from the
device.
2.
Check the device for visible
damage.
13