Troubleshooting NL
Malfunction
Cause and Troubleshooting
Program centrifugal
run does not start.
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the program Centrifuge.
fizzing, hissing
loud.
Water is flushed into the detergent drawer under
pressure.
▶
No error - normal operating noise.
long, humming
loudly before the start
of the washing or
softening cycle.
Intelligent dosing system doses detergent or care
agent.
▶
No error - normal operating noise.
Short buzzing sound
after switching on
of the device.
Intelligent dosing system performs a function test.
▶
No error - normal operating noise.
Loud noise during
spinning.
The appliance is not leveled properly.
▶
Adjusting the device
Device feet are not fixed.
▶
Secure the device feet. Adjusting the device
Transport protections have not been removed.
▶
Remove transport protections.
Clapping, clattering
in the pump.
A foreign object has entered the pump.
▶
"Cleaning the drain pump", page 43
Slurping, rhythmic
suction sound.
Pump is active, the solution is being pumped out.
▶
No error - normal operating noise.
wrinkling.
Spin speed is too high.
▶
Set a lower spin speed for the next wash.
The load quantity is too high.
▶
Reduce the load during the next wash.
Inappropriate program set for the type of fabric.
▶
Select a suitable program for the type of fabric.
55