NL Set up and connect
2.
To adjust the appliance, turn the
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
2.
Check the mains plug for tightness.
All appliance feet must be firmly
planted on the floor.
3.
Tighten the lock nuts against the
housing with an open-end wrench
SW17 hand-tight.
Hold the appliance foot while
doing so and do not adjust the
height.
4.8 Connecting the appliance
electrically
1.
Insert the mains plug of the
mains cable of the device into a
socket in the vicinity of the
device.
The connection data of the device
can be found in the technical data
18