NL Home Connect
s Operating the device
always takes precedence. During
this time, operation via the Home
Connect app is not possible.
s
Reconnect the device to the Wi-
Fi network with WPS function.
5.
16.1 Connecting device to
WLAN home network
(WiFi) with WPS function
16.2 Connecting device to
WLAN home network
(WiFi) without WPS
function
Requirements
s Your router has a WPS
function.
s Wifi on the router is activated.s The
basic WiFi setting on the device
rate is activated.
"activate WiFi on the device",
s The appliance has
cation reception from the home
network (Wi-Fi).
s The Home Connect app is on the
mobile terminal installed.
If your router does not have WPS
function, you can manually connect the
device to your home network (Wi-Fi).
Requirements
s Wifi on the router is activated.s The
basic WiFi setting on the device
rate is activated.
"activate WiFi on the device",
s The appliance has
cation reception from the home
network (Wi-Fi).
s The Home Connect app is on the
mobile terminal installed.
1.
On for at least 3 seconds Control via
app
to press.
a The display shows auto reflected
to give.
1.
On for at least 3 seconds Control via
app
to press.
2.
Press Start/Refill
.
3.
Press the WPS button on the
router within 2 minutes.
a The display shows auto reflected
to give.
Follow the information in your
router's documentation.
a flashes in the display.
a The device is connecting
with the home Wi-Fi network.
a When the display shows
displayed and permanent
lights up, the device is connected
to the home WiFi network.
2.
Set the program to position 2.
a The display shows JUICE reflected
to give.
3.
Press Start/Refill
.
a flashes in the displaya The device
creates its own WiFi
home network with the network
name (SSID) HomeConnect on.
4.
Call up the WiFi settings on the
mobile end device.
.
4.
If the display err shows, the device is
not connected to the home Wi-Fi
network.
s
Check if the device is within
range of the Wi-Fi network.
38