background image

en 

Home Connect

36

3.

To end the setting process, wait
briefly.

Note: 

To adjust the basic dosage for

, repeat the steps with 

i-Dos

  .

Home Connect

16 Home Connect

Home Connect

This appliance is network-capable.
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.

Note: 

You can find further information

in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.

¡

→ 

"Connecting the appliance to a

WLAN home network (Wi-Fi) with
WPS function", Page 36

¡

→ 

"Connecting the appliance to a

WLAN home network (Wi-Fi)
without WPS function", Page 37

The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.

Tips

¡

Please consult the documents sup-
plied by Home Connect.

¡

Please also follow the instructions
in the Home Connect app.

Notes

¡

Please note the safety precautions
in this instruction manual and
make sure that they are also ob-

served when operating the appli-
ance via the Home Connect app. 
→ 

"Safety", Page 4

¡

Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.

16.1 Connecting the appli-

ance to a WLAN home
network (Wi-Fi) with
WPS function

Requirements

¡

Your router has a WPS function.

¡

Wi-Fi is activated on the router.

¡

The Wi-Fi basic setting is activated
on the appliance. 
→ 

"Activating Wi-Fi on the appli-

ance", Page 38

¡

The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.

¡

The Home Connect app is installed
on your mobile device.

1.

Press and hold   for at least
3 seconds.

a

The display shows 

Aut

.

2.

Press 

.

3.

Press the WPS button on the
router within the next 2 minutes.
Take note of the information in the
documents for your router.

a

 flashes on the display.

a

The device connects to the Wi-Fi
home network.

a

If the display shows and 

 lights

up permanently, the appliance is
connected to the Wi-Fi home net-
work.

4.

If the appliance is not connected
to the Wi-Fi home network, the dis-
play shows 

Err

.

Summary of Contents for WM6HXKO1DN

































































Reviews: