en
Operating the appliance
36
varioSpeed
Washing in a shorter time while
achieving a washing result that is
consistent with the normal performance.
Touch
varioSpeed
to activate or
deactivate this additional programme
setting.
Note:
With the
varioSpeed
additional
programme setting activated, the
maximum load of washing will be
reduced, and extra water will be needed
for the washing process.
1
Operating the
appliance
Operating the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Cottons 90°C
programme.
"Before washing for the first time"
Notes
■
Never switch on a damaged
appliance!
■
Inform customer service!
1.
Insert mains plug.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2.
Turn the water tap on.
3.
Open the appliance door.
Select programme/switch on
the appliance
Note:
If you have activated the
childproof lock, you must first deactivate
it before you can set a programme.
Use the programme selector to select
the required programme. The
programme selector can be rotated in
either direction.
The appliance is switched on.
The
programme default settings
for the
selected programme alternately appear
in the display panel:
■
The maximum load and
■
the duration of the programme and
■
...