7
Faults, causes, and remedies
Note
Faults and malfunctions occurring during the warranty period and requiring repair work on
the gearbox must be remedied only by Technical Support. In the case of faults and
malfunctions occurring after the warranty period, the cause of which cannot be precisely
identified, we advise our customers to contact Technical Support.
If you need the help of Technical Support, please provide the following information:
Data on the rating plate
Nature and extent of the fault
Suspected cause
Table 7- 1
Faults, causes, and remedies
Faults
Causes
Remedy
Excessive bearing play and / or
bearing defective
Check bearing and replace if
necessary
Unusual noises from gearbox
Teeth defective
Check teeth and replace
if necessary
Fastening bolts loose
Tighten bolts / nuts; see
Checking tightness of fastening
Excessive external load on drive
input and output
Check load against rating data
Damage in transit
Check the gearbox for damage
in transit
Damage due to blocking during
startup
Call Technical Support
Excessive bearing play and / or
bearing defective
Check bearing and replace
if necessary
Unusual noises from drive unit
Fastening bolts loose
Tighten bolts / nuts; see
Checking tightness of fastening
BA 2012
Operating Instructions, 03/2013, 70000004024300
35
Summary of Contents for Worm Gearbox S 5 BA 2012
