4
Installation
4.1
Unpacking
NOTICE
Transport damage impairs the correct function of the gearbox
Never commission faulty gearboxes or geared motors.
Check the gearbox or geared motor for completeness and for damage. Report any missing
parts or damage immediately.
Remove and dispose of the packaging material and transport fixtures appropriately.
4.2
General information on installation
ATEX version gearboxes
Effect on bearings of stray electric currents from electrical equipment.
When mounting the gearbox on or connecting it to the machine, take care to
ensure potential equalization. The information on grounding and equipotential
bonding provided by the motor supplier must be observed.
WARNING
Uncontrolled starting or reversing of the system under load
The entire system must be load-free so that there is no danger during this work.
NOTICE
Irreparable damage to toothed components and bearings due to welding
Do not carry out any welding work on the gearbox. The gearbox must not be used as a
grounding point for welding operations
BA 2012
Operating Instructions, 03/2013, 70000004024300
17
Summary of Contents for Worm Gearbox S 5 BA 2012
