background image

16

Setting the programme

Selecting the laundry type

Selecting the spin speed or Rinse Stop

Selecting pushbuttons for auxiliary functions

Starting the programme

To select the type of laundry or a specific programme, set
programme selector  

to the required programme. See

section SELECTING THE PROGRAMME.

The machine is switched on by turning the programme
selector to any position other than “Off”.

1

To select auxiliary functions, press one or more auxiliary
function pushbuttons 

. Also see chapter entitled

AUXILIARY FUNCTION PUSHBUTTONS. 

An audible signal

sounds if these are not compatible with the selected
programme.

6

Every programme that is selected recommends an optimal spin
speed. 

By briefly pushing pushbutton 

, you may:

-  select a different spin speed
-  Select Gentle Spin. The programme ends with a Gentle Spin

at 110 rpm

-  or select Rinse Stop.

The laundry remains in the final rinse water.

(see section

“Spin speed”).

7

Display

Display

The machine displays the

most suitable temperature

and spin speed for the

programme, as well as the

programme duration.

Temperature selection

If you wish, you can change the suggested washing
temperature using button  

.

For a cold wash, set the temperature to “0”.

2

Indicator light(s) for the

selected option(s)

Display

Display

Start the programme using the ”Start/Pause” pushbutton 

.

The Washing indicator lights up.
.. or use button

to select the DELAYED START or DELAYED

END function. Use the buttons to continue making the settings.

3

4

Display

Before switching on the machine, check if the mains lead is connected and the tap is open.

Ensure that the drum and lid are properly closed.

Summary of Contents for WP13T483BY

































Reviews: