17
Setting functions
Cancelling the DELAYED START or DELAYED END selection
If you want the machine to start immediately and to cancel the current time delay, press button
until the display lights for DELAYED START or DELAYED END go out and then press the
Start/Pause button.
3
Button
enables you to choose between the DELAYED START and DELAYED END
display.
3
Setting a Delayed Start
Display
Select the DELAYED START function using button
(press
only once) and, using button
, enter the duration of the
DELAYED START per hour between midnight and noon, and
per 2 hours between noon and midnight.
The time displayed corresponds to the length of time before
the start of the selected programme.
DELAYED START countdown:
• The DELAYED START is displayed by the hour from
24 hours to 1 hour, and then by the minute from 59 min
to 1 min.
• Four small bars light up, one after the other, until the end
of the DELAYED START period.
• As soon as the programme starts, the REMAINING TIME
appears in the display and the programme sequence
display is switched on.
The duration of the programme can depend upon
imbalance and foam detection.
5
3
Setting a DELAYED END
Display
Select the DELAYED END function using button
(press
twice) and, using button
enter the duration of the
DELAYED END per hour between midnight and noon, and
per 2 hours between noon and midnight.
The time displayed corresponds to the length of time
before the end of the selected programme plus the number
of hours selected using button
.
Sequence of the DELAYED END:
• The duration of the DELAYED END is displayed and the
display for the programme sequence lights up when the
cycle begins.
The duration of the programme can depend upon
imbalance and foam detection.
5
5
3