18
Ending the programme
Terminating the programme
If you would like to terminate a programme before it is
completed:
• Set programme selector
to ”Off”.
(It may be 1 to 2 minutes until the lid unlocks).
The drum does
not
stop with the cover opening facing up.
Note: drum may be hot when using the 90°/60° settings!
1
End of the programme
• To remove the laundry more easily, the cover opening is
automatically facing up at the end of the programme.
• Turn programme selector
to ”Off”.
1
(1) - After the programme has ended and “Stop” is displayed, it is possible to return to
the programming mode.
(2) - For purposes of safety, it is recommended that the mains cable be unplugged and the
tap closed when the programme has ended.
Display
Off
Display
• Press the ”Start/Pause” push button
to interrupt the
programme.
The ”Pause” and programme sequence bars flash.
• Remove or add laundry if necessary. (It may be 1 to 2
minutes until the lid unlocks).
• Press the ”Start/Pause” push button
to restart the
programme.
If a Delayed Start has been selected, the drum may be
opened at any time during the selection of the Starting Time
before the start of the programme without aborting the
programme and having to start anew.
4
4
Adding or removing laundry
(not possible during spin cycles):
Display
Audible signal, counter for
the interruption time and
display lights for the cycle
sequence flash alternately.
The counter resumes and
the display lights again light
up “constantly”