22
Changing the programme
Changing the programme
All modifications are possible before the
”Start/Pause” pushbutton
, has been
pressed.
If you want to make changes while a
programme is running, you will hear an
audible signal for any changes that are
not possible.
-
immediately after the start of the
programme:
Change programme
(e.g. from COTTONS to
DELICATES etc.). Then press the
”Start/Pause” pushbutton
again.
-
During the wash programme
The selected programme is maintained.
Depending on the point a programme has
reached, changes are only possible to a
limited extent. To make a change, set the
programme selector
to “Off”. When
changing the programme from, for
example, DELICATES to COTTON, some
of the water may be drained.
The
temperature
can be changed during the
programme without pressing the ”Start/Pause”
pushbutton again.
The
spin speed
may be changed at any time.
It is possible to activate or deactivate all
additional functions, irrespective of what
point the programme has reached, as long
as they are not currently in operation.
Exceptions: Easy iron and Intensive laundry.
For these programmes, one additional
function can be selected.
- When the delayed programme start or end
is running.
All of the programme changes that are made
during the delayed start are taken into
consideration.
The Delayed Start can be changed at any
time.
You can press button
to switch between
the display for the Delayed End and the
display for the Delayed Start.
The programme can be immediately started
by re-initialising the Delayed Start and
pressing button
to cancel the functions
for the Delayed End or Delayed Start.
All available
auxiliary functions
may be
activated and deactivated during the
selection of the Starting Time.
-
At the end of the programme
If STOP appears in the display, a new
programme can be selected without having
to first turn the programme selector
to
“Off”.
1
3
3
1
4
4
