Installation and connection
en
15
1.
Pull out the condensation hose
from the connecting piece.
The condensation hose is connec-
ted to the connecting piece at the
factory.
Note:
When removing the con-
densation hose, liquid may leak
out of the connecting piece.
2.
Push the condensation hose into
the holder.
3.
Push the water drain hose as far
as it will go into the connecting
piece.
4.
Insert the water drain hose into the
hose guide.
Ensure that you do not bend the
water drain hose.
5.
Connect the appliance to the water
outlet.
→
"Water outlet connection types",
Tip:
To collect condensation in the
condensation container again (e. g. if
you change where the appliance is
located), carry out these steps in re-
verse order.
Summary of Contents for WQ43G200GC
Page 39: ...Cleaning and servicing en 39 2 Clean the moisture sensor with a sponge ...
Page 49: ......
Page 50: ......
Page 51: ......