Cleaning and servicing
en
37
1.
Open the maintenance flap.
If you place a cloth beneath the
maintenance flap, you can collect
the remaining water from the base
unit.
2.
Open the lever for the heat ex-
changer cover.
3.
Pull out the heat exchanger cover
by the handle.
Cleaning the base unit
You can remove any visible dirt in the
base unit.
CAUTION
Risk of cutting!
Touching sharp edges on the heat
exchanger may lead to cuts.
▶
Do not touch the fins on the heat
exchanger.
1.
.
2.
Use a soft brush to clean the heat
exchanger cover.
Make sure that you remove all dirt
from the seal.
3.
Carefully clean the fins on the heat
exchanger with a vacuum cleaner
and brush attachment.
Ensure that you vacuum the fins
from top to bottom so that they do
not become deformed or dam-
aged.
Summary of Contents for WQ43G200GC
Page 39: ...Cleaning and servicing en 39 2 Clean the moisture sensor with a sponge ...
Page 49: ......
Page 50: ......
Page 51: ......