Troubleshooting
en
41
Fault
Cause and troubleshooting
Creasing.
The load is too large.
▶
Observe the maximum load capacity of the
→
.
The laundry lies in the drum for too long after drying.
1.
Remove the laundry from the drum as soon as the
drying programme has finished.
2.
Spread the items of laundry for cooling.
Unsuitable programme for the type of fabric.
▶
Set the suitable programme for the type of fabric.
→
Easy-Care fabrics are dried for too long.
▶
"Changing the dryness level", Page 25
.
▶
"Adjusting the dryness level", Page 25
Anti-Crease not activated.
▶
Activate the Anti-Crease function.
→
and programme
terminated.
Condensation tank filled.
1.
"Emptying the condensation container", Page 33
.
2.
"Inserting the condensation container", Page 34
3.
"Starting the programme", Page 30
Water drain hose is caught or jammed.
1.
Ensure that the water drain hose is not kinked or
trapped.
2.
Route the water drain hose without kinks.
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.
→
"Connecting the water drain hose", Page 14
Water drain hose is blocked.
▶
Rinse the water drain hose with tap water.
Foreign object is located in the base unit
1.
"Opening the base unit", Page 36
2.
Remove the foreign objects that are present.
3.
"Closing the base unit", Page 38
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The appliance uses condensation for the automatic
self-cleaning.
▶
Not a fault – no action required.
Water drain hose is not connected correctly.
Summary of Contents for WQ43G200GC
Page 39: ...Cleaning and servicing en 39 2 Clean the moisture sensor with a sponge ...
Page 49: ......
Page 50: ......
Page 51: ......