en
Positioning and connecting
22
Also required for connection of the
water drainage hose to a siphon:
1 hose clip Ø 24–40 mm (DIY store) is
also required for connection
to a siphon. Connecting the water
Useful tools:
■
■
Spanner with:
– size 13: for loosening the
transportation protection devices
– size 17: for aligning the appliance
feet
Installation
Note:
Moisture in the drum is due to
the final inspection.
Secure installation
:
Warning
Risk of injury!
■
The washing machine is heavy –
caution: take care when lifting it.
■
If the washing machine is lifted by
protruding components (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■
If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
■
Frozen hoses may crack/burst.
Do not install the washing machine
in areas exposed to frost and/or
outdoors.
■
If the washing machine is raised by
protruding components (e.g.
washing machine door), the
components may break off and the
washing machine may be damaged.
Do not lift the washing machine by
protruding parts.
Note:
If in doubt, have the appliance
connected by a technician.
Installation surface
Note:
The washing machine must be
stable so that it does not move around.
■
The surface on which it is installed
must be firm and level.
■
Soft floors/floor coverings are not
suitable.
Installation on a base or a
wooden joist floor
:
Warning
Damage to the appliance!
The washing machine may “wander”
and tip/topple from the base when
spinning.
Always secure the washing machine
feet with fixing brackets.
Fixing brackets: Order no. WX 975600
Note:
If installing on a wooden joist
ceiling:
■
If possible, install the washing
machine in a corner.
■
Screw a water-resistant wooden
panel (min. 30 mm thick) to the floor.
