Programme default settings
en
13
Note:
When measuring the amount of
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information.
~
Page 17
0
Programme default
settings
Programme default settings
Note:
You can find possible
programme default settings in the
overview; these differ depending on the
model.
The programme default settings for all
programmes are preset at the factory
and are displayed in the display panel
after the programme is selected.
°C Temperature
(Temperature, Temp. ° C)
Depending on programme progress,
you can change the preset washing
temperature (in °C) before and during
the programme.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The maximum temperature that can be
set depends on the programme that has
been selected.
Overview of programmes
~
: printed
supplement for the operating and
installation instructions
0
Spin speed
(Spin speed)
Depending on programme progress,
you can change the spin speed (in rpm;
revolutions per minute) before and
during the programme.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
Setting – – – : Rinse stop = without final
spin, washing remains in the water after
the last rinse.
Saving
Soiling/note
Reduced temper-
ature and deter-
gent quantity as
per the recom-
mended dosage
Light
No visible dirt or stains. Cloth-
ing has taken on some body
odour, e.g.:
■
Light summer/sports
clothing (worn for a few
hours)
■
T-shirts, shirts, blouses
(worn for up to one day)
■
Guest bed linen and hand
towels (used for one day)
Normal
Visible dirt or a few light
stains, e.g.:
■
T-shirts, shirts, blouses
(sweat soaked, worn a
few times)
■
Towels, bedding (used for
up to one week)
Temperature as
per the care label
and detergent
quantity as per
the recom-
mended dosage
for heavy soiling
Heavy
Dirt and/or stains clearly visi-
ble, e.g. tea towels, baby
items, work clothing
