Siemens WS**G Series, Instruction Manual And Installation Instructions

en

    Additional programme settings

14

You can select "Spülstopp" (Rinse stop) 

to prevent creasing if the laundry will not 

be taken out of the washing machine 

immediately after the programme has 

ended.
Maximum spin speed depends on the 

programme and model.
Overview of programmes 

~

: printed 

supplement for the operating and 

installation instructions

5

 Finished in (Ready in)

(Finished in (Ready in))
The respective programme length is 

displayed by selecting the programme.
The length of the programme is 

automatically adjusted when the 

programme is running. Changes to the 

programme default settings or 

additional programme settings also 

change the programme length.
Before starting the programme, the end 

of the programme (Finished in (Ready 

in) time) can be preselected in 

increments of one hour (h = hours) up 

to a maximum of 24 hours. 
To do this, repeatedly press the 

corresponding button until the required 

setting is displayed.

Note:  

The programme length is 

included in the selected Fertig in (Ready 

in) time.

After the start, the preselected time e.g. 

8h

 is displayed and the time counts 

down to the start of the wash 

programme. The programme length is 

then displayed, e.g. 

2:30

(hours:minutes).

Changing the preselected time:

You can change the preselected time 

before the start of the programme as 

follows:

1.

Select the Start button.

2.

Press the 

0

 Finished in (Ready in) 

button repeatedly until the required 

number of hours is displayed. 

3.

Select the Start button.

Adding laundry while the preselected 

time continues running:

1.

Select the Start button.

2.

The symbols  

YES

 and 

v

 light up in 

the display panel. The loading door 

can be opened and laundry can be 

added.

3.

Close the door.

4.

Select the Start button. The 

preselected time continues to run.

\

Additional programme 

settings

Additional programme settings 

Note:  

You can find possible additional 

programme settings in the overview; 

these differ depending on the model.

(

 speedPerfect

(

(

 speedPerfect, 

(

 Speed, 

(

 TimePerfect)

For a shorter wash time with a 

comparable washing effect to the 

standard programme. 

Note:  

Do not exceed the maximum 

load.

Overview of programmes 

~

: printed 

supplement for the operating and 

installation instructions