en
Operating the appliance
14
3.
Close the door.
The indicator light on the Start button
flashes, and the default settings for the
programme appear continuously on the
display panel. Changes may be made
to the default settings.
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Dosing
Dose detergents and care products
according to:
■
The water hardness (ask your water
supply company)
■
The manufacturer's instructions on
the packaging
■
The amount of laundry
■
Soiling
Filling
1.
Pull out the detergent drawer.
:
Warning
Eye/skin irritation!
Detergent and care products may
run out if the detergent drawer is
opened while the machine is in
operation.
Open the drawer carefully.
Rinse eyes/skin thoroughly if they
come into contact with detergents or
care products.
If swallowed accidentally, seek
medical advice.
2.
Add detergent and/or care products.
Notes
– When measuring the amount of
all detergents, additives, care
products and cleaning agents,
always follow the manufacturer's
instructions.
– Dilute thick-consistency fabric
softener and fabric conditioner
with a little water. This will prevent
blockages.
– Pour liquid detergent into
corresponding dispenser and
place in drum.
Dispenser
I
Detergent for prewash
Dispenser
i
Softener, starch. Do
not exceed maximum
dose
Dispenser
II
Detergent for main
wash, water softener,
bleach, stain remover
