Positioning and connecting
en
25
Water outlet
Caution!
Water damage
If the attached drainage hose slips out
of the washbasin due to high water
pressure when draining the appliance,
leaking water may cause damage.
Secure the drain hose so that it cannot
slip out.
Notes
■
Do not kink the water drain hose or
put strain on it lengthways.
■
Height difference between the
installation surface and the drain:
Min. 60 cm, max. 100 cm
Drainage into a wash basin
:
Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot
detergent solution (e.g. when draining
hot detergent solution into a
washbasin).
Do not reach into the hot detergent
solution.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the washing machine/
fabrics.
Make sure that:
■
The plug does not block drainage
from the washbasin.
■
The water drains away quickly
enough.
■
The end of the drain hose is not
immersed in the drained water.
Installing the drainage hose
:
Drainage into a siphon
The connection point must be secured
using a hose clamp with a diameter of
24-40 mm (available from specialist
dealers).
Connection
Drainage into a plastic pipe
with rubber sleeve or into
a gully
Connection
