3
4
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Emptying condensation
Empty container
after
each drying operation!
1.
Pull out condensation container keeping it horizontal.
2.
Pour out condensation.
3.
Always push container in fully until it clicks into place.
If
Empty water
flashes in the display panel
a
What to do if..., Page 10
.
Cleaning the fluff filter
Clean the fluff filter
after
each drying operation.
1.
Open the door, remove fluff from door/door area.
2.
Pull out and fold open the fluff filter.
3.
Remove the fluff (by wiping the filter with your hand).
If the fluff filter is very dirty or blocked, rinse with warm water and dry
thoroughly.
4.
Close and reinsert the fluff filter.
Switching off the dryer
Turn the programme selector to
Off
.
Do not leave laundry in the dryer.
Removing the laundry
The automatic anti-crease function causes the drum to move at specific intervals, the washing remains
loose and fluffy for an hour (two hours if the additional
Iron Dry
function is also
selected-
depending on model
).
individual requirements
Inspecting the
dryer
Sorting and loading laundry
See also separate instructions for “Woollens basket”
Selecting and adjusting the programme
Drying
Condensation container
Control panel
ʋ
ʋ
he drying programme ...
1
2
3
Connecting the
mains plug
Drying
Drum
All buttons are sensitive and only
need to be touched lightly.
Only operate the dryer with
the fluff filter inserted!
Air inlet
Fluff filter
Drum interior light
(depending on model)
Maintenance
flap
Programme end
once lights up in the display.
Interrupt programme
removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed.
The programme selected must then be resumed and completed.
Never switch the dryer off before the drying process has ended.
Drum and door may be hot!
1.
Open door, the drying process is interrupted.
2.
Load or remove laundry and close door.
3.
If required, select a new programme and additional functions.
4.
Press the
Start/Pause
button.
(c
'c
a
)c
a
a
a
a
a
a
a
a
a
a
a
a
a
a
ˎ
'
that require
a longer drying time; e.g. for polyacrylics, polyamide,
Press the Start/Pause button
a
a
a
0, 1, 2, 3
