Appliance settings
en
31
2
Appliance settings
Appliance settings
You can activate/deactivate or change
the appliance settings directly.
Childproof lock
You can activate or deactivate the
appliance's childproof lock. You can
activate the childproof lock to prevent
the control panel from accidentally
being operated.
Activate/deactivate the appliance
setting as follows:
Press and hold
5
(Time Dry)
and
B
(Ready in) at the same time for
approx. 3 seconds.
w
is shown/hidden in the display.
The childproof lock is activated/
deactivated.
Notes
■
You can activate the childproof lock
at any time after you switch on the
appliance.
■
The childproof lock will remain active
even after the appliance has been
switched off. In order to operate the
control panel when you turn on the
appliance, you will need to
deactivate the childproof lock.
Altering the appliance settings
You can call up and change the
following appliance settings:
■
Volume of the audible notification
signals (e.g. at the end of a
programme)
■
Volume of the audible operating
signals
■
Spin speed used for spinning the
laundry before drying
Call up and change the appliance
settings as follows:
1.
Set the programme to position 1.
2.
Press and hold
‹
(Start/Pause). At
the same time:
3.
Set the programme to position 2.
4.
Release
‹
(Start/Pause).
You can now alter the appliance
settings.
Adjusting the volume of the audible
notification signals
You can adjust the volume of the
notification signal emitted at the end of
the programme.
Adjust the appliance setting as
follows:
1.
Set the programme to position 3.
The current setting will appear on the
display.
#
+
3
;
#
+
3
;
#
+
3
;
