en
Energy-saving tips
12
7
Energy-saving tips
Energy-saving tips
■
Spin the laundry before drying. The
drier the laundry, the shorter the
programme will be, in turn reducing
energy consumption.
■
Load the appliance with the
maximum loads permitted for the
programmes.
Note:
If the maximum load is
exceeded, this extends the programme
duration and increases energy
consumption.
■
Operate the appliance in a ventilated
room and make sure that the air inlet
on the appliance is unobstructed so
that air exchange can take place
unhindered.
■
Regularly remove the fluff from the
appliance. If there is fluff in the
appliance, this extends the
programme duration and increases
energy consumption.
■
If you do not perform any actions on
the appliance for an extended period
before the programme starts or once
the programme has ended, the
appliance will automatically switch to
Energy saving mode. The display
and indicator lights will go out after a
few minutes and
Start/Pause
Ü
will
flash.To end Energy saving mode, all
you need to do is perform an action
on the appliance, such as opening
and closing the door.
■
If you do not perform any actions on
the appliance for an extended period
when it is in Energy saving mode,
the appliance will automatically
switch itself off.
5
Installing and
connecting the
appliance
Installing and connecting the appliance
Included with the appliance:
(
Accompanying documents (e.g.
installation and operating
instructions)
0
Fastening parts
8
U-piece for fixing the drain hose
in place
@
Drain hose
H
Connection adapter
+
#
Summary of Contents for WT45W460IN
Page 47: ...6 ...