en
Operating the appliance
30
Setting a programme
Note:
If you have activated the
childproof lock, you must deactivate it
before you can set a programme.
1.
Set the programme you require.
The programme settings will appear
on the display.
2.
Adjust the programme settings, if
required.
Starting a programme
Press
Start/Pause
Ü
.
Note:
If you want to prevent the
programme from being adjusted
inadvertently, you can activate the
Programme progress
The programme status will be indicated
on the display.
Note:
When a programme is selected,
the expected drying time for the
maximum permitted load is displayed.
The moisture sensor measures the
residual moisture in the laundry as it is
being dried. The programme duration
and the remaining time indicated on the
display are automatically adjusted as
the programme progresses, depending
on how damp the laundry is (exception:
Timed programmes).
Changing the programme or
adding more laundry
You can remove or add laundry and
change or adjust the programme at any
time during drying.
1.
Open the door or press
Start/
Pause
Ü
to pause the programme.
2.
Add or remove laundry.
3.
If required, select a different
programme or a different
programme setting.
4.
Close the door.
5.
Press
Start/Pause
Ü
.
Note:
The programme duration is
updated on the display, depending on
the load and on the residual moisture in
the laundry. The values displayed may
change when the programme or load is
changed.
Cancelling the programme
The programme can be cancelled at
any time by opening the door or
pressing
Start/Pause
Ü
.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, remove all
items of laundry from the dryer and
spread them out to allow the heat to
dissipate.
Programme end
-
‹
- will appear on the display.
Summary of Contents for WT45W460IN
Page 47: ...6 ...