en
Installation and connection
14
During installation, ensure that:
■
The dryer is placed on a clean, level
and firm surface,
■
The mains plug can be accessed at
all times,
■
The area around the dryer is kept
clean and
■
The dryer is levelled using the
threaded feet.
Note:
Check the alignment of the
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
Note:
If in doubt, have the appliance
connected by a specialist.
Optional accessories
Order optional accessories
*
from the
after-sales service:
■
Washer-dryer stack connection set:
To save space, the dryer can be
placed on top of a suitable washing
machine of the same width and
depth.
The dryer must be secured to the
washing machine using this
connection set.
Order number with pull-out worktop:
WZ20400
;
Order number without pull-out
worktop:
WZ11410
.
■
Platform:
For easier loading and unloading,
raise your dryer with a platform.
Transport laundry with the clothes
basket integrated into the platform
drawer.
Order number:
WZ20500
.
■
Basket for woollens:
Dry individual woollen items, sports
shoes and soft toys in the basket for
woollens.
Order number:
WZ20600
.
Transport and frost protection
1.
Empty the condensate container.
2.
Select any programme using
the programme selector.
3.
Press the Start button.
4.
Wait for 5 minutes.
Note:
The condensation is drained.
5.
Empty the condensate container
again.
6.
Switch off the dryer.
Note:
Despite draining, there will
always be some residual water in
the dryer.
Caution!
Any residual water may leak out
and cause material damage.
Transport the dryer in an upright
position.
Caution!
The dryer contains coolant and may be
damaged.
Allow the dryer to rest for two hours
before initial use.
* Depending on the model
Summary of Contents for WT47W4E9DN
Page 39: ...6 ...
