en
Signal setting
30
M
Signal setting
Signal setting
You can change the following settings:
■
The volume of the audible signal at
the end of the programme
and/or
■
The volume of the audible button
signals.
■
Activate or deactivate automatic
switch-off.
You will need to activate the setting
mode in order to change these settings.
Activating setting mode
1.
Switch the dryer on.
2.
Select the Cottons programme in
position 1.
3.
Press and hold the button for the
dryness level and, at the same time,
turn the programme selector
clockwise to position 2.
4.
Release the button for the dryness
level.
The setting mode is now activated and
the preset volume for the audible signal
at the end of the programme appears
on the display panel.
Changing the volume or automatic
switch-off
Leave the programme selector or turn it
to:
■
Position 2: Press the button for the
"Ready in" time to change the
volume of the
audible signal at the
end of the programme
and/or
■
Position 3: Press the button for the
"Ready in" time to change the
volume of the
audible button
signals
.
■
Position 4: Press the button for the
"Ready in" time to activate or
deactivate
automatic switch-off
of
the dryer. "ON" for activated and
"OFF" for deactivated.
Note:
To save energy, your dryer
will switch itself off after 15 minutes
when the "Automatic switch-off"
function is active.
Exiting setting mode
You can now end the process and
switch off the dryer. The settings have
been saved.
1 = quiet
2 = medium, 3 = loud,
4 = very loud
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
Summary of Contents for WT47W560TR
Page 39: ...6 ...