en
Help with the appliance
44
--------
Note:
If you cannot rectify the fault yourself by turning the appliance off and then on
again, please contact our after-sales service.
Humidity in the room is increas-
ing.
Make sure the room is sufficiently ventilated.
Drying programme is stopped. If the drying programme is stopped due to a power failure, restart the
programme or remove the laundry and spread it out.
Unusual noises when drying.
Automatic cleaning of the heat exchanger produces noises. This does
not indicate that there is a malfunction on the appliance.
The appliance feels cold
despite drying.
Not a fault. The appliance can dry effectively at low temperatures using a
heat pump.
Residual water in the conden-
sation container despite the
appliance being connected to
the drain hose*.
If the optional drain hose is installed, residual water remains in the con-
densation container due to the appliance's self-cleaning function.
* Depending on how the appliance is equipped or the available accessory