background image

Safety instructions    

en

7

The mains plug must be 

freely accessible at all times. 

If this is not possible, in 

order to comply with the 

relevant safety regulations, a 

switch (all pole 

disconnection) must be built 

into the permanent 

installation in accordance 

with electrical installation 

regulations.

If using a residual current 

circuit breaker, only use one 

that bears the following 

mark: 

z

. The presence of 

this mark is the only way to 

be sure that it fulfils all the 

applicable regulations.

:

Warning

Risk of electric shock/fire/

material damage/damage to 

the appliance!

If the appliance's mains cable is 

altered or damaged, this may 

result in electric shock, short 

circuiting or fire due to 

overheating.

The mains cable must not be 

kinked, crushed or altered, and 

must not come into contact with 

any heat sources.

:

Warning

Risk of fire/material damage/

damage to the appliance!

The use of extension cords or 

power strips may result in fire 

due to overheating or short 

circuiting.

Connect the appliance directly 

to an earthed socket that has 

been correctly installed. Do not 

use extension cords, power 

strips or multi-way couplers.

:

Warning

Risk of injury/material 

damage/damage to the 

appliance!

The appliance may vibrate or 

move when in operation, 

potentially resulting in injury 

or material damage.

Place the appliance on a 

clean, even, solid surface 

and, using a spirit level to 

guide you, level it with the 

screw-in feet.

Risk of injury/material damage/damage to the appliance!

Summary of Contents for WT47W591GB





















































Reviews: