Troubleshooting
en
57
Fault
Cause and troubleshooting
The water tank for the crease-removal function is
empty.
▶
Fill water tank.
→
"Filling the water tank", Page 33
Water overflows when
filling the water tank.
The water tank has been filled.
Note:
The overflowing water is harmless.
▶
Do not pour any more water into the water tank.
The water tank filter is soiled.
▶
"Cleaning the water tank filter", Page 49
The laundry is too
damp.
Unsuitable programme for the type of fabric.
▶
Set a timed programme for the subsequent drying.
→
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The load is too large.
▶
Observe the maximum load capacity of the
→
.
After the end of the programme, warm laundry feels
damper than it actually is.
1.
Remove the laundry from the drum as soon as the
drying programme has finished.
2.
Spread the items of laundry for cooling.
Unsuitable dryness level set.
▶
"Changing the dryness level", Page 23
.
Drying target not adjusted.
▶
"Adjusting the dryness level", Page 23
Load too small.
▶
Set a timed programme for the subsequent drying.
→
Moisture sensor dirty.
▶
"Cleaning the moisture sensor", Page 50
.
The drying process is interrupted and the condensa-
tion tank has been filled.
1.
"Emptying the condensation container", Page 31
.
2.
"Inserting the condensation container", Page 32
3.