background image

en

    Safety instructions

8

Incorrectly placing (stacking) 

this appliance on top of a 

washing machine may result 

in injury, material damage 

and/or damage to the 

appliance.

If this appliance is to be 

placed on top of a washing 

machine, the washing 

machine must be of at least 

the same depth and width as 

the appliance, and it must be 

secured in place with the 

appropriate connection set if 

available. 

~

 Page 16

The appliance MUST be 

secured with this connection 

set. Stacking the appliance 

in any other way is forbidden.

Risk of injury/material damage/damage to the appliance!

If you take hold of any of the 

appliance's protruding parts 

(e.g. the appliance door) in 

order to lift or move it, these 

parts may break off and 

cause injury.

Do not take hold of any of 

the appliance's protruding 

parts in order to move the 

appliance.

:

Warning

Risk of injury!

The appliance is very heavy. 

Lifting it may result in injury.

Do not lift the appliance on 

your own.

Risk of injury!

The appliance has sharp 

edges on which you could 

cut your hands.

Do not take hold of the 

appliance by its sharp 

edges. Wear protective 

gloves to lift it.

Risk of injury!

If the hoses and mains 

cables are not correctly 

routed, they may constitute a 

tripping hazard, which may 

result in injury.

Route hoses and cables 

such that they do not 

constitute a tripping hazard.

Operation

:

Warning

Risk of explosions/fire!

Laundry that has come into 

contact with solvents, oil, wax, 

wax remover, paint, grease or 

stain remover may ignite when 

dried in the machine, or even 

cause the appliance to explode. 

Therefore please note:

Rinse the laundry thoroughly 

with warm water and 

detergent before drying it in 

the machine.

Do not place laundry in this 

appliance to be dried if the 

laundry has not been 

washed first.

Do not use the appliance if 

industrial chemicals have 

been used to clean the 

laundry.

Summary of Contents for WT7UH640GB





































































Reviews: