21
!
Danger, electrical current!
Repairs must only be carried out by the aftersales
service or an authorised expert.
If you cannot rectify a fault yourself or a repair is
necessary:
Turn the
program selector
to
Off
.
Remove the plug from the socket.
Contact the aftersales service
(see page 22).
Troubleshooting... Cause
Solution
Ambient temperature above
30° C.
Make sure that the dryer has
sufficient ventilation.
The wrong program was
selected.
Set the drying program using
the program information
(from page 16).
Power cut for several hours
Restart the program by
pressing the Start button again.
Drying is not
satisfactory
The laundry feels damper
than it really is.
Reset the drying time if the
laundry has not been dried
sufficiently after cooling down.
Laundry is not
dried evenly
-
Too much laundry
-
Only large items of
laundry
-
Items of laundry
with different fibre
constructions
are being dried.
Dry
-
small amounts of
laundry
-
large and small items
together.
-
Items according to their
fibre construction.
Condensation in
the exhaust air
hose.
The exhaust air hose is too
long.
Arrange the dryer so that the
exhaust air hose is no more
than 2 m long.