26
Washer-dryer
stack
connection set
Order no.: WZ 20260
The dryer can be placed on top of a Siemens
washing machine of the same dimensions to
save space.
!
Risk of injury!
For reasons of safety, the dryer must be
installed by an expert. Always use a
connection set to secure the dryer to the
washing machine.
Assembling the
exhaust air hose
Exhaust air hose:
Adapter: 494355
(optional)
Order no.: WZ 20180
There are exhaust air outlets in the left side
wall and the rear panel of the dryer.
Select the most suitable exhaust air outlet
after installing the dryer.
Turn the exhaust air hose (see Special
accessories) or the adapter directly to the
required exhaust air outlet. Turn the hose or
adapter clockwise to do so.
Seal off the other exhaust air outlet with the
plastic cover.
1 Plastic cover
2 Exhaust air hose
Place the end of the exhaust air hose in the
open air without bending it. The exhaust air
hose should only be positioned horizontally
or vertically and never left to sag.
The exhaust air hose should not be more
than 2m long.
Position the exhaust air hose so that there is
no counter pressure (e.g. from wind) on the
exhaust outlet.