੬
~
㺖䯂
࣐
䲢
㊳
㇁
嵏
㇁
嵏
䝴
嵲
儔
䝴
眯
䯂
帵
䪆
儤
㺖
·
朗
朖
〰
朎
儆
⵿
氰
に
䯂
氰
䙿
㈀
䶭
䯂
㈀
応
䫟
a
ʑ
ʑ
ʑ
a
ʑ
ʑ
11
What to do if ...
ʑ
Water is running out.
– Fit/refit drainage hose.
– Tighten screw–fitting on the supply hose.
ʑ
Water not flowing in.
Detergent not washed in.
–
Start
/Soak not selected?
– Tap not open?
– Filter blocked? Clean filter
a
Page 9
.
– Water inlet hose kinked or jammed?
ʑ
Washing machine door cannot be
opened.
– Safety function active. Programme stopped?
– Water in drum? Select
Single Spin
programme.
ʑ
Programme does not start.
–
Start
/Soak selected?
– Washing machine door not closed properly?
ʑ
Detergent solution is not drained.
– Clean detergent solution pump
a
Page 9
.
– Clean outlet pipe and/or drainage hose.
ʑ
Additional function could not
activate for selected programme.
–
Can the additional function be selected?
a
Page 7
,
programme overview.
ʑ
Water not visible in the drum.
– Not a fault - water below the visible area.
ʑ
Spin cycle actuated several times. – Not a fault - unbalanced load detection system adjusts
imbalance.
ʑ
Detergent in chamber
I
is not
washed away.
–
Prewash
programme not selected?
ʑ
Detergent residue in the detergent
dispenser
– Detergent is damp or lumpy, clean the detergent
dispenser
a
Page 8.
– Use the dosing aid for liquid detergent.
ʑ
Foam is coming out of the
detergent drawer.
– Too much detergent used?
Mix 1 tablespoon of fabric conditioner with ½ litre of
water and pour into dispenser II in the detergent drawer.
– Reduce detergent dosage for the next wash cycle.
ʑ
Excessive noise, vibrations and
”wandering” during spin cycle.
– Appliance feet fixed?
Secure appliance feet
a
Installation instructions.
– Transportation bolt removed?
Remove transportation bolt
a
Installation instructions.
ʑ
Display panel/indicator lights do
not function while the appliance is
running.
– Power failure?
– Circuit breaker tripped? Reset the circuit breaker/
change the fuse.
– If the fault occurs repeatedly, contact customer service.
ʑ
Programme sequence longer than
usual
– Not a fault-unbalanced load detection system is
adjusting the imbalance by repeatedly distributing the
laundry .
– Not a fault-foam detection sysytem active.
ʑ
Detergent residues on the laundry – Occasionally, phosphate-free detergents contain water-
insoluble residues.
– Select
Single Rinse
or blush the laundry after washing.
ʑ
Washing result not satisfactory
– Soiling is greater than expected? Select a suitable
programme and select option
Intensive
.
– Detergent is underdosed?
ʑ
If you cannot correct a fault yourself or a repair is required:
– Set the programme selector to
off
and pull the mains plug out of the socket.
– Turn off the tap and call the customer services.
Operating instructions
en
XQG60-WM08X0R00W
– Please read the
operating instructions
and installation
instructions supplied
before switching on
the washing machine.
– Any failure and losses
caused by ignoring
the above mentioned
items, including
cautions in the
instructions, are not
covered by our
warranty and liability.
– Please keep all
documents in a safe
place for further
reference. In cases of
doubt, please contact
customer service.
– Follow the safety
instructions on
Page 8.
– Contents of this
instruction could be
changed without
written notice.
