Operating the appliance
en
11
1
Operating the
appliance
Operating the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
ㆂ⌱
(
Drum clean) 90°C
programme.
Before washing for the first time
Notes
■
Never switch on a damaged
appliance!
■
Inform customer service!
1.
Insert mains plug.
:
Warning
Riskof death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2.
Turn the tap on.
3.
Open the appliance door.
Adjusting the washing
programme
Turn the programme selector to the
desired programme (eg.
ỹ㓷⢙
(Cotton)
40°C
programme). Presettings
and maximum load are indicated in the
display field.
You can use the displayed presettings
or adjust the selected programme
optimally to the items of washing by
changing the presettings or selecting
additional options.
Notes
■
Options are retained when the
appliance is switched off and can be
selected, deselected or changed
depending on the progress of the
programme.
■
All buttons are sensitive, they only
need to be touched gently. If the
button
䖜䙏
0
(Spin speed)
,
窜悾
û
(Finish in) time is held down, the
setting options are automatically
scrolled through.
Placing laundry into the drum
Insert the washing.
Close the door.